Keynote Presentations
September 30th |
|
| Kazuhiro Iijima, Nissan |
"CAE of Nissan - Digitization of the New Car Development Process and the Prospects to the Future" |
| Dr. Gerd Schuhmacher, EADS Military |
"Numerical Optimization Methods in the Aerospace Design Process - Civil and Military Applications and Benefits -" |
| Jean Marc Crepel, Renault |
"CAE Integration in Renault Design Process" |
Dave Peberdy, Unilever
|
"Delivering Innovation and Intelligence in Product Design" |
| Daniel Moulène, Lumeneo
|
"SMERA - Development of an Innovative Alternative Electric Car"
|
| James Scapa, Altair |
"Altair's Company Vision" |
| |
|
Keynote Presentations
October 01st |
|
| Dr. Uwe Schramm, Altair |
"Altair's Product Direction - HyperWorks Vision" |
| Henrik Wentzel, Scania |
"A Modelling Tool that Fully Exploits Product Modularization" |
| Udo Jankowski, Tecosim |
"The Future of CAE: Integrate or Fail" |
| |
|
Technical session 1: Composites
September 30th |
|
Dr. Tamas Havar, Francisco Roman, EADS Innovation Works
|
"Analysis of Innovative Composite Aircraft Structures" |
| Jean Baptiste Mouillet, Altair |
"Improved Composite Damages and Failure Simulation with RADIOSS" |
| Karine Thoral Pierre, CEDREM
|
"The Blast Energy Absorption with New Material 3D Composite" |
| Salim Bouabdallah, Esilv, M. Zarroug, PSA |
"Modelling of Windshield Mechanical Behaviour with Radioss" |
| Silvio Cabrele, Eurocopter |
"Concept Design of a Composite Aircraft Door Through Integrated Finite Element Analysis, Multi-Body Simulation and Structural Optimization in HyperWorks" |
| |
|
Technical session 2: Safety
September 30th |
|
| Romuald Fallet, Segula |
"Mine Explosion and Blast Effect on Vehicle: Analysis of the Potential Damage on Passengers" |
| Prof. Z.-Q. Feng, Université d'Evry |
"Finite Element Simulation of Impact Problems - Some Comparison Results Between FER/Impact and RADIOSS" |
| Pierre Huss, Ludovic Finet, Alstom
|
"Numerical Reconstitution of the Zoufftgen Accident" |
| Virginie Astier, Inrets-LBA
|
"Finite Element Simulation of Humeral Intramedullary Nailing: Case of Torsion Loading" |
Lionel Thollon, Yves Godio, Inrets-LBA
|
"Numerical Simulation to Predict Rib Fractures in Case of Motorcyclist Accident" |
| |
|
Technical session 3: Development Process
September 30th |
|
| Mark Gevers, Stefan Schneider Tecosim |
"TEC|WORX Toolbox: Optimized Model Build Using HyperWorks Automation Technologies"
|
| Dr. U. Jakobus, Dr. Markus Schick, EMSS |
"Using FEKO for Electromagnetic Simulations in the Automotive Environment" |
| Alexander Siefert, Wölfel beratende Ingenieure |
"Application of Software Tool CASIMIR within HyperMesh for the Assessment of Static and Dynamic Seating Comfort" |
| Nicolas Davout, Sogeti |
"Virtual Testing Methodologies" |
| W. Feikert, Huß&Feickert |
"Assessment of Fatigue Life According to FKM-Code Within HyperWorks"
|
| |
|
Technical session 4: Multibody Simulation
September 30th |
|
| Rajiv Rampalli, Altair |
"Altair MBD Solutions - The Current Status and Future Directions " |
| David J. Fothergill, ARRK Technical Services Ltd |
"The Use of MBD Modelling Techniques in the Design and Development of a Suspension System" |
| Marcello di Fina, TR Engineering |
"Process Automation of Suspension Simulation with HyperWorks MotionView" |
| Markus Kvist, CAE Value |
"Door Closing/Opening Efforts and Energies" |
| Takeshi Inoue, Toyota Auto Body Co.,Ltd.
|
"Door Slam Simulation for Durability Analysis with Multibody Dynamics" |
| |
|
Technical session 5: Optimization
September 30th |
|
| Simon Gardner, Force India |
"Optimization of a Composite Aerodynamic F1 Rear Wing" |
| Andrea Crucianelli, Ferretti
|
"Development Methodology Based on Numerical Simulation Applied to a New Composite Pleasure Boat" |
| Andrea Avaldi, Ericson Racing
|
"Structural Design, Optimization and Construction for SpeedBoat Yacht" |
| Michael Hamacher, FKA
|
"Optimization of Tailored Blank Concepts for Vehicle Doors" |
| Mauricio Monteagudo Galindo, Faurecia
|
"Size Optimization Process of an Exhaust System" |
| |
|
Technical session 6: Safety
September 30th |
|
| Francis Arnaudeau, Altair
|
"Guidelines and Evolutions on Airbag Modelling with RADIOSS" |
| Jerome Lagrut, AB Volvo
|
"Simulation For Airbag Sensor Calibration" |
| Gernot Oberhofer, Matfem
|
"A New Modular Material Model for the Design of Light Weight Structures in Automotive Engineering with Respect to Crashworthiness" |
| Dr. Horst Lanzerath, Ford R&A Engineering Europe |
"Simulation Tool Including Failure for Structural Adhesives in Full-Car Crash Models" |
| Caroline Deck, R. Willinger, University of Strasbourg |
"Head Injury Criteria Based on Head FE Modelling" |
| |
|
Technical session 7: Development Process
September 30th |
|
| Philippe Gilotte, Plastic Omnium Auto Exterior
|
"Integration of CFD Computation in a General FEM Computation Methodology" |
| Toru Yamasaki, Mitsushi Okada, Software Cradle
|
"Duct Design Optimization of an HVAC System Using Fast CFD Solver SC/Tetra" |
| Dr. Oshin Peroomian , Metacomp Technologies
|
"CFD Analysis of the American Challenger Rocket Car using CFD++" |
| Peter Heyes, nCode
|
"Efficient Processes for the Development and Validation of Dynamically Loaded Structures Against Fatigue" |
| Axel Werkhausen, Magna Powertrain Engineering Center Steyr GmbH & Co KG |
"Fatigue Analysis 2008 is More than Comparing Nominal Stress to Fatigue Limits" |
| |
|
Technical session 8: Multibody Simulation
September 30th |
|
Mathias Roemer, Opel
Christoph Halfmann, Opel |
"Golden Source Templates for Vehicle Dynamics Simulation with HyperWorks MotionView" |
| Stefano Verzelli, Ducati
|
"Development of a Multibody Model of a Vehicle on a Fatigue Test Bench" |
| Prof. Dr. Michael Gipser, Esslingen University
|
"CTI: Next Generation Tire Interfacing" |
| Dr. Heiko Baum, FLUIDON
|
"DSHplus-STC - Fluid Power Specific Simulation Modules for an Integrated Virtual Engineering in MotionSolve" |
| Christian Prettenthaler, Martin Rudigier, Martin Horn; VIF
|
"Robust Driver Model for Vehicle Dynamics Simulations" |
| |
|
Technical session 9: Optimization
October 01st |
|
| Michal Brezina, Ricardo
|
"Optimization of Aluminium Material Use for an Automotive Crankcase" |
| Xavier Dugros, DPS
|
"Optimization of an Engine Bracket with OptiStruct" |
| Luciano Maestrelli, Studio Maestrelli
|
"Bicycle Frame Optimization by Means of an Adavanced Gradient Method Algorithm" |
| Luca Frattari, University of Camerino
|
"Topology Optimization in Industrial Design" |
| Dr. Loris Barbieri, Prof. Maurizio Muzzupapa, University of Calabria
|
"Guidelines for an Efficient Integration of Computer Aided Innovation with Optimization and PLM" |
| |
|
Technical session 10: Safety
October 01st |
|
| Maciek Wronski, Altair
|
"Multi-Domain Approach to Parallel Computations in Structure Dynamics Using RADIOSS" |
| Fabien Breda, PSA
|
"New Approach to Modelize Crash Honeycomb Barrier: Shell Mesh of the Honeycomb" |
| Dr. Robert Schilling, Ford Werke GmbH
|
"Numerical Simulation of Polymeric Foams Under Impact Loading" |
| Aurélie Brachet, PSA
|
"Implicit Radioss Application: Gravity Loading for Full Car Crash Test Simulations" |
| Prof. Michel Arrigoni, Ensieta
|
"Numerical Simulation of Stress Waves in Water: Application to Lithotripsy and Decontamination of Waterway"
|
| |
|
Technical session 11: Development Process
October 01st |
|
| Stefan Eberhard, Altair, Jörg Brauner, BMW
|
"HyperMath: Practical Use Cases" |
Jonas Larsson, ABB
|
"Simulation-Based Development of Industrial Robots" |
| Doris Mohr, Bombardier Germany |
"Efficient Modelling and Postprocessing of Spot Welded Railway Vehicle Car Bodies" |
| Arcangelo Schena, CIMES
|
"Manufacturing Simulations: Simulation of the Actions in Silos and Tanks with the Smooth Particles Hydrodynamics Method" |
| Rainer Jouaux, ED Züblin AG
|
"Tunnel Design with HyperWorks Using a Custom-Specified FE-Solver" |
| |
|
Technical session 12: Aerospace
October 01st |
|
| Stephane Grihon, Airbus
|
"A380 Cruciform Joint Optimization" |
| Wolfang Machunze , EADS Innovation Works; Matthias Radny, Altair
|
"Usage of HyperWorks within Aviation Industries - Particularly Composite Optimization" |
| Alice Vagnot, Eurocopter, Yannick Chauveau, EMA
|
"Ice Impact on Critical Helicopter Parts is one of the Safety Issues Considered by Regulations Requirements" |
| Dr. Pietro-Carlo Marucchi-Chierro, Roberto Ullio, ThalesAlenia
|
"Landing Impact and Water Splashdown Simulations of a Re-Entry Vehicle - Preliminary Analysis" |
| Jyrik Majamaki, Eurocopter |
"Water Impact Analysis with RADIOSS Using Eulerian Water Model" |
| |
|
Technical session 13: Optimization
October 01st |
|
| Axel Seeger, Delphi Berlin
|
"Optimization and Robustness Analysis in Occupant Protection Systems" |
| Blai Sorita, Henkel
|
"New Bus Optimized Structure to Improve the Roll-Over Test (ECE R66) Using Structural Foam (TEROCORE) with High Strengh Steel" |
| Torsten Gärtner, Tecosim; Oliver Ganßloser, Trenkwalder Engineering
|
"Development and Optimization of Instrument Panels for Frontal Crash with LowerBodySled" |
| Pierre Jousset, Sika
|
"Development of an Inverse Identification Procedure to Evaluate Material Constitutive Parameters for the Finite Element Simulation of Structural Adhesives" |
| Vasant Pednekar, LANXESS Deutschland GmbH
|
"Topology Optimization of Plastic Metal Hybrid Structures" |
| Levent Aymelek, Ricardo
|
"Optimization of SCR Flow by Means of 3D CFD Simulation with Vectis and HyperWorks" |
| |
|
Technical session 14: Safety
October 01st |
|
| Samuel Bidal, Altair
|
"Improving Human Model, Example of Applications" |
| Martijn Tibosch, Axel Hänschke, Ford-Werke GmbH
|
"Application of Finite Element Dummies in Frontal Crash Simulation" |
| Dr. Daniel Baumgartner, R. Willinger, Universite de Strasbourg
|
"Human Head Injury Criteria Against Impact Derived from Numerical Real World Accidents Reconstruction" |
| Sebastien Laport, ENSAM (CNRS)
|
"Identification and Modelling of the Ribs Mechanical Behaviour" |
| Aurelien Laville, IMASSA/LBM
|
"Geometrical and Mechanical Modelling of the Cervical Spine for Dynamic Applications" |
| Meyer F., Bourdet N., Willinger R., URM (University Strasbourg) |
"Head-Neck Finite Element Model - Validation in the Frequency Domain and Simulation of a Rear Impact" |
| |
|
Technical session 15: Development Process
October 01st |
|
| Jörgen Hilmann, Ford Werke GmbH, Hans Zimmer SFE GmbH |
"Process Improvements to Significantly Reduce Turn Around Times for Attribute Assessments in the Early Days of Vehicle Development" |
| Ulrich Scheibe, GKN Driveline
|
"How to Get Simulation Better Accepted" |
| Geraldine Guebara, Sogeti
|
"Robust Analysis, Reliability and Test Correlation of Aeronautical Structures Using HyperStudy" |
Mehrdad Ghanbari, Mahle
|
"Injecting Innovation into Performance Engine Design" |
| Martin Mueller, Opel
|
"Mount Studio: A Tool for Efficient Engine Mount System Development for Global Vehicle Platforms" |
| Delphine Lizarazu, Sogeti
|
"Meshing Production for Acoustic Analyses" |
| |
|
Technical session 16: Manufacturing
October 01st |
|
| Lionel Morancay, Altair |
"A Survey of RADIOSS Features and Performances for Stamping Simulation" |
| Alexis Bacha, ALCAN
|
"Industrial Use of Numerical Models for the Evaluation and Improvement of Extrusion Die Designs" |
| Amin Farjad Bastani, Sintef
|
"Study of Flow Balance Over a Press Cycle with HyperXtrude" |
| Hubert W. Klein, Dirk Brune, Horst Gers, University Meschede and Honsel
|
"Aluminum Extrusion Design and Calculation by HyperXtrude" |
| Fabien Bogard, Y.M. Li, Y.Q. Guo, Universite de Reims |
"Comparison of a Pseudo-Inverse Approche in Stamping Analysis with One-Step and Incremental Methods in HyperForm" |
| Alfredo Elia, AES, Guido Vindrola, AMET |
"A Business Intelligence Tool Applied to a Manufacturing Simulation Environment" |
| |
|
© Copyright 2008 Altair Engineering, Inc. All Rights Reserved.