| Keynote Presentations - October 28th |
| James Scapa, Altair |
Altair's Company Vision |
| Dr. Uwe Schramm, Altair |
Altair's Product Direction - HyperWorks Vision |
| Thomas Merchant, Peugeot |
200 Years Peugeot |
| Andrea-Ivan Marasco, Airbus |
The Airbus A350XWB Optimization Centre: An Optimization Deployment Model |
| Djamal Midoun, Ford |
CAE and Testing, A Hand in Hand Process in Crashworthiness |
|
|
|
| Keynote Presentations - October 29th |
| Alessandro Mazzardo,
solidThinking |
Getting the Right Design, Getting the Design Right |
| LeCorre, Alstom; Roberts, Bombardier |
Design and Validation Process for Rail Passive Safety |
| Christophe Lemaitre, Faurecia |
Global CAE & Testing Approach at Faurecia Automotive Seating |
| Jerome Lagrut, Volvo 3P |
Driving Innovation through Multidisciplinary Optimization |
| Toshihiro Araki, Nissan |
CAE Current Status and Future Plan in Nissan Motor |
| Jean-Luc Assor, HP & Ullrich Becker-Lemgau, Intel |
Accelerating CAE Innovation through an Intelligent, Converged Infrastructure |
|
|
|
| Session 1: Optimization - October 28th |
| Julien Guye & Bernard Charlet, PSA |
Fatigue Topology Optimization of a Crankcase |
| Peter Seggewiß, Pierburg |
Introduction and First Experiences with Optimization Tools within the Pierburg DRIVE Product Development Process |
| Cagri Cevik, FEV |
Dynamic Optimization of Crankshafts with ESLM Methodology |
| Isabel Braun, IndustrieHansa |
Structural Optimization and Stress Analysis with HyperShape/CATIA in the Automotive Field |
| Dr. Anthony Hähnel & Arnaud Sohier, Renault |
Shape Optimization for Early and Detailed Design: Applications to Cylinder-Blocks and Oil Pans |
| Dr. Matthieu Duchemin, MCE-5 |
Topology and Free Shape Optimization of the Control Rack of the MCE-5 VCRi Engine |
|
|
|
| Session 2: RADIOSS/Safety - October 28th |
| Jose Dias, ACTS |
Development of a Pre-Crash System for Side Impact Protection Enhancement |
| Marc Gevers, TECOSIM |
Optimizing of laminated glass model in RADIOSS and LS-DYNA for safety simulation |
| Nicolas Vallino, PSA |
Coupling one Step/RADIOSS |
| Daniel Baumgartner, University of Strasbourg |
Analysis of Traumatic Brain Injuries Using a Rat Brain Finite Element Model |
| Robert Kant, Humanetics Innovative Solutions |
Development of a CPU Time Efficient Dummy Model - H350 Express RADIOSS Model |
| Denis Pacheteau, AKKA |
Innovative Studies of New Frontal Impact Cases |
|
|
|
| Session 3: NVH Development Process - October 28th |
| Marco Spinelli, FIAT |
Reducing Brake Squeal Using DOE Approach on Complex Analysis with HyperStudy |
| Dr. Ronaldo Nunes, Daimler |
Multibody Dynamic Simulation Combined with Finite Element Method to Assess Break Moan Noise |
| Marcelo Fonseca Barbosa, Valeo |
Dynamic Stiffness Optimization Using RADIOSS |
| Joachim Sigl, Magna Powertrain Lannach |
NVH CAE Model Creation and Assembly Strategy for Powertrain Components Including Gear Sets |
| Issmail Meskin, Valeo |
NVH Approach on Front End Division Using HyperWorks Applications |
| Sébastien Drouilhet-Peyre, Sogeti |
Methodology Improvements for Numerical Acoustic Analyses |
|
|
|
| Session 4: Aerospace - October 28th |
| Daniel Zell, MT Aerospace |
Optimization Strategies Applied to Advanced Ariane 5 Upper Stage Concepts with Specific Focus to Mass Reduction of Stringer Stiffened Cylinder Shells |
| Alexander Bruns, Airbus |
Sizing-Optimization of Different Flap-Concepts |
| Gaetantocosimo Massari & Francesca Bianchi, AgustaWestland |
Structural Analysis of a Composite Structure in AgustaWestland |
| Dietmar Vogt, EADS |
A New Method to Visualize Geometric Scatter from Stochastic Simulation Studies |
| Ronan Pitois, Eurocopter |
The new HyperMesh/Samcef Interface at Eurocopter: Deployment and Industrial Applications |
| Brian Bautz, EADS IW |
Optimization Based Concept Development of Innovative CFRP Cargo-Floor Structures |
|
|
|
| Session 5: Optimization - October 28th |
| Ahmed Oshinibos, ThyssenKrupp Tallent Limited |
Application of Design of Experiment in Crash Beam Development |
| Eric Hansenne, Bosal |
CFD Analysis and Optimization of an Exhaust Component Using HyperWorks and its Partner Solutions |
| Maurizio Casasola, CRC |
Topology Optimization of Swing Arm Axle Plate for Mv Agusta F4 MY '10 |
| Elvis Kwassi, DINCCS |
Optimization Methodologies for SME's |
| Dr. Frank Braymand, L&L |
Coupling of Digimat to RADIOSS and OptiStruct: Improved Physical Property Prediction of Short Fiber Reinforced Polyamide by Utilizing Fiber Orientation |
| Maxime Le Moine, COOPER STANDARD AUTOMOTIVE |
Innovative Methodology for Automotive Weatherstrip Design Using an Optimization Technique |
|
|
|
| Session 6: RADIOSS/Safety - October 28th |
| Francis Arnaudeau, Altair |
Crash Simulations in Few Minutes – Enabling Technology and Development Opportunities |
| Olivier Moulinjeune, Rhodia |
M.M.I. ConfidentDesignTM: Improving the Prediction of RADIOSS Calculations with Rhodia Data and Digimat |
| Patrick Jumin, SNCF |
Railway Specificities in Crash Simulations |
Dr. Salim Abdennadher,
Altair Development |
RADIOSS Honeycomb Scaled Cell Size Modeling Method: Application to Deformable Barrier Models |
| Michel Arrigoni, Ensieta |
Contribution of RADIOSS Simulation to the Development of Shock Adhesion Tests |
| Harold van Aken, Code Product Solutions BV |
Fluid-Structure Interaction Using RADIOSS Explicit Wind Loading on a Flexible Structure |
|
|
|
| Session 7: Development Process - October 28th |
| Axel Werkhausen, Magna ECS |
Efficient Modelling and Evaluation of Welding Seams at Stadler Rail |
| Renè von Dombrowski, FLUIDON |
Co-Simulation of Modern CAx Tools - Setup Guidelines and Usage Experiences |
| Peter Heyes, nCode/HBM |
Fatigue Analysis of Welded Structures Using nCode DesignLife |
| Paul Batten, Metacomp |
Automotive Aeroacoustics Applications using CFD++ and CAA++ |
| Roger Assaker, e-Xstream |
Effective & Efficient Material Modeling Using DIGIMAT’s Nonlinear Multi-Scale Modeling Technology with the HyperWorks Suite |
| Venny Yang, Moldex |
Moldex3D-Radioss Integration for Designing Plastic Parts to Meet Reliability Requirements |
| Dr. Macoumba N'Diaye, FLUOREM/Software
Cradle |
SC/Tetra The Innovative and
Award Winning CFD software |
|
|
|
| Session 8: Ship Building - October 28th |
| Andrea Avaldi, AB Structures |
Design and Test of a New Generation Carbon Keel Fin for Ocean Sailing Boat |
| Ronald van Dijk, FEMTO |
Slamming of Ships with RADIOSS |
| Lazaros Tsioraklidis, Inter FEA |
Simulation of an Ocean Wave Energy Generator Using SPH |
| Jean-François Badreau, MBDA |
Interaction of Motor Exhaust with Mobile Underwater Structure Using RADIOSS ALE |
| Shengcheng Ji, UTC, UMR |
Numerical Simulation of Ship-Induced Waves in Inland Waterways, with RADIOSS |
| Tom Goodwin, Altair PD |
CVF Structural Design - Productivity Benefits through the Application of HyperWorks |
|
|
|
| Session 9: Optimization - October 29th |
| Matt Tomlin, Leeds University on behalf of EADS IW |
Topology Optimisation of an Additive Layer Manufactured (ALM) Aerospace Part |
| Mikael Thellner, Scania |
Topology Optimization with Contact Constrains |
| Markus Longeru, Sogeti |
Robust Approach for the Optimization of Riveted Connections in CFRP Parts and the Effect on Global Structure Optimization |
| Gerlando Augello, Thales |
A Tool for a Quick Evaluation of Tank Domes Behavior and for their Optimization Using HyperStudy |
| Alicia Schauz, Porsche Engineering Services GmbH |
Merging the CAD and CAE Worlds - Implementation of HyperShape/CATIA in Customer Development Projects at Porsche Engineering |
|
|
|
| Session 10: Development Process - October 29th |
| Dr. Wolfgang Feickert, IHF |
Assessment of Static Strength and Fatigue Life According to FKM-Code within HyperWorks |
| Cord Bommelmann, Grimme |
CAE Methods in the Development Process of GRIMME Root Crop Harvesters |
| Christophe Bastien, University of Coventry |
HyperWorks - The Industrial Standard Toolset for Academia |
| Mauricio Monteagudo, Faurecia Exhaust Systems |
Definition and Selection of the Proper Flex Coupling for an Exhaust System |
| Sébastien Roth, UTBM |
Mesh and Orientation Dependance of FE Models for Dynamic Simulations |
|
|
|
| Session 11: RADIOSS - October 29th |
| Dr. Andrea Mura, Politecnico di Torino |
Contact Pressure in Spline Couplings Teeth Surface |
| Francois Renaudin, DOREL |
Child Restraint Design Optimization Using Simulation Tools
|
| Aurelién Laville, LBM |
Parametric and Subject-Specific Finite Element Modeling of the Cervical Spine: How does Morphology Influence the Biomechanical Behavior? |
| Karine Thoral Pierre, CEDREM |
High Speed Impact on Armour Plate: Methodology and Correlation with Tests |
| Virginie Astier, Protomed |
Cardiovascular Stent Development: to an Improved Realistic Life Cycle Simulation |
|
|
|
| Session 12: Enterprise/PBS/HPC - October 29th |
| Max Fariello, Altair |
Elevating HyperWorks to the Enterprise |
| Marco Grandi, APUS |
HyperControl, a HiQube Solution for Decision Making |
| Gérard Gil, CINES |
Large scale HPC workflow management using Altair PBS GridWorks on a National Academic Computing Center |
| Steve Kimmey, Oracle |
Managing Innovation and the Simulation Lifecycle |
| Roberto Vadori, Prompt Engineering |
An Implementation of Virtual Cluster Running HyperWorks - Performance and Cost Comparison |
|
|
|
| Session 13: Development Process - October 29th |
| Christoph Gümbel, Porsche |
Green CAE- The Automotive Simulation Center Stuttgart |
| Praddep Srinivasa, Altair |
Durability Over Night |
| Julien Tersac, Faurecia Interieur |
Faurecia Experience with Altair Process |
| David Queval, Mecaplast |
Towards a 'Right-at-First-Time' Product/Process Solution Using the Altair's FEA Software in the Interior Parts Design Phase |
| Andrea Baldini, University of Modena |
Software Development for the Post-Processing of Fatigue Calculation |
|
|
|
| Session 14: Multibody Simulation - October 29th |
| Marco di Cecco, Piaggio&C S.p.A. |
Simulating the Rear Roller Test Bench for the Scooter Development |
| Frank Harmeling, Karl Mayer |
Simulation of Electric Drives and Closed Loop Controls in MotionView |
| Dr. Peter Riede, Opel |
Ground Clearance Analysis of Passenger Cars Using HyperWorks/MotionView |
| Andrea Romeo, Proplast |
Simulation of the Mechanical Behavior of a Rubber Pumping System Under Large Deformations |
| Frank Schoenmakers, TNO/TASS |
MF-Swift: A tire model for handling, ride comfort, durability and control applications |
|
|
|
| Session 15: Manufacturing - October 29th |
| Mesut Kaya, Coskunoz AS |
Experimental and HyperForm Analysis of Springback in Sheet Metal Forming for DP Steels |
| Mark Melnykowycz, Rieter Automotive |
Development of Aluminum Heat Shield Designs Using OptiStruct and HyperForm |
| Edmondo Di Pasquale, Simtech |
A Study of Springback Using HyperForm |
| Martin Risberg, SWEREA/SWECAST |
Optimization for Different Manufacturing Processes |
| Elie Bitboul, Promold |
Insert Molding Calculation with RADIOSS |
|
|
|
| Session 16: Civil/Nuclear Engineering/Design - October 29th |
| Sylvain Tholance, ATR |
Impact of Concrete Structures |
| Thomas Nierhaus, Evonik |
Enforcement of a Research Reactor Facility Under Earthquake Conditions |
| Dr. Olivier Martin, JRC |
Numerical Missile Impact Analysis on Concrete Containment Buildings of Nuclear Power Plants: Review and Recent Progress |
| Shahrokh Ghavamian, NECS/EMA |
Simulation of a Blast Scenario and its Consequences on a Steel Frame Industrial Structure |
